GAL22V10D-15LPI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-15LPI Overview
In the mobile phone network, there are 10macro cells, which are cells with high-power antennas and towers.It is part of the 24-DIP (0.300, 7.62mm) package.There are 10 I/Os programmed in it.There is a 24terminations set on devices.The terminal position of this electrical component is DUAL.Power is supplied by a voltage of 5V volts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Through Holeshould be used for mounting the chip.The GAL?22V10series comprises this type of FPGA.There are 24 pins on the chip.The GAL22V10shows its related parts.If high efficiency is desired, the supply voltage should be kept at [0].In this case, Through Holeis used to mount the electronic component.There are 24 pins embedded in the device.A voltage of 5.5V is the maximum supply voltage for this device.It is powered by 4.5Vas its minimum supply voltage.This device runs on 5Vvolts of electricity.You can achieve 83.3MHzfrequencies.A total of 11dedicated inputs are available for detecting the status of input signals.It is configured with an output of 10.This product has a total of 132 terms associated with it.
GAL22V10D-15LPI Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-15LPI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-15LPI CPLDs applications.
- Programmable polarity
- DDC INTERFACE
- PLC analog input modules
- Dedicated input registers
- State machine design
- Power up sequencing
- Page register
- LED Lighting systems
- Reset swapping
- Portable digital devices
