GAL22V10D-15QJ
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 55mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
GAL22V10D-15QJ Overview
10macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is part of the 28-LCC (J-Lead) package.The device is programmed with 10 I/Os.It is programmed to terminate devices at [0].The terminal position of this electrical component is QUAD.The power supply voltage is 5V.It belongs to the family [0].It is recommended that the chip be packaged by Bulk.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the GAL?22V10 series.It is equipped with 28 pin count.The GAL22V10indicates that its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].The electronic part is mounted by Surface Mount.The device is designed with pins [0].A maximum supply voltage of 5.25Vis used in its operation.In order for it to operate, a supply voltage of 4.75Vis required.This device runs on 5Vvolts of electricity.There is 83.3MHz frequency that can be achieved.The status of input signals is detected by 11dedicated inputs.It is configured to produce 10outputs.This product has a total of 132 terms associated with it.
GAL22V10D-15QJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-15QJ Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-15QJ CPLDs applications.
- Address decoding
- ON-CHIP OSCILLATOR CIRCUIT
- Interface bridging
- Field programmable gate
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- DDC INTERFACE
- Boolean function generators
- I2C BUS INTERFACE
- INTERRUPT SYSTEM
- Software-Driven Hardware Configuration
