GAL22V10D-20LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 20 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-20LJI Overview
There are 10 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].In this case, there are 10 I/Os programmed.It is programmed that device terminations will be 28 .QUADis the terminal position of this electrical part.The power source is powered by 5Vvolts.It belongs to the family [0].It is packaged in the way of Bulk.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.Mount the chip by Surface Mount.As part of the GAL?22V10series, it is a type of FPGA.28pins are programmed on the chip.According to the GAL22V10, its related parts can be found.This electronic part is mounted in the way of Surface Mount.It is designed with 28 pins.It operates with the maximal supply voltage of 5.5V.A minimum supply voltage of 4.5V is required for this device to operate.A total of 5V power supplies are needed to run it.It is possible to achieve a frequency of 50MHz.The status of input signals is determined by 11dedicated inputs.It is configured with 10 output.There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.
GAL22V10D-20LJI Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-20LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-20LJI CPLDs applications.
- Synchronous or asynchronous mode
- Preset swapping
- ON-CHIP OSCILLATOR CIRCUIT
- INTERRUPT SYSTEM
- Digital multiplexers
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- USB Bus
- I2C BUS INTERFACE
- Custom shift registers
- Software-Driven Hardware Configuration
