GAL22V10D-20LPI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2000 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-20LPI Overview
10 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 24-DIP (0.300, 7.62mm)package, you will find it.This device has 10 I/O ports programmed into it.It is programmed to terminate devices at [0].This electrical component has a terminal position of 0.It is powered from a supply voltage of 5V.The part belongs to Programmable Logic Devices family.Bulkshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].There should be a Through Holeon the chip.In terms of FPGAs, it belongs to the GAL?22V10 series.It is programmed with 24 pins.Its related parts can be found in the [0].Optimal efficiency requires a supply voltage of [0].A Through Holeis mounted on this electronic component.The device has a pinout of [0].This device operates at a voltage of 5.5Vas its maximum supply voltage.With a minimal supply voltage of [0], it operates.This device runs on 5Vvolts of electricity.This can be achieved at a frequency of 50MHz.The input signals are detected by 11dedicated inputs.This device has 10outputs configured.There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.
GAL22V10D-20LPI Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-20LPI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-20LPI CPLDs applications.
- I/O expansion
- Power up sequencing
- ToR/Aggregation/Core Switch and Router
- Reset swapping
- Power Meter SMPS
- Programmable polarity
- I/O PORTS (MCU MODULE)
- Power automation
- Synchronous or asynchronous mode
- Digital systems
