GAL22V10D-25LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 38.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-25LJI Overview
There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a 28-LCC (J-Lead) package.It is programmed with 10 I/Os.28terminations have been programmed into the device.This electrical component has a terminal position of 0.An electrical supply voltage of 5V is used to power it.The part is included in Programmable Logic Devices.It is recommended to package the chip by Bulk.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.It belongs to the GAL?22V10series of FPGAs.There are 28pins on the chip.Its related parts can be found in the [0].For high efficiency, the supply voltage should be maintained at [0].The electronic component is mounted by Surface Mount.The pins are [0].A maximum voltage of 5.5Vis required for operation.With a minimal supply voltage of [0], it operates.A total of 5V power supplies are needed to run it.There is a maximum frequency of 38.5MHz.There are 11 dedicated inputs used to detect the status of input signals.The output configuration is set to [0].The product has 132 product terms.
GAL22V10D-25LJI Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-25LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-25LJI CPLDs applications.
- Discrete logic functions
- Address decoders
- Digital designs
- Battery operated portable devices
- Timing control
- LED Lighting systems
- Programmable polarity
- PLC analog input modules
- ON-CHIP OSCILLATOR CIRCUIT
- Code converters
