GAL22V10D-25LPI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 38.5MHz |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-25LPI Overview
In the mobile phone network, there are 10macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 24-DIP (0.300, 7.62mm) package.In this case, there are 10 I/Os programmed.There is a 24terminations set on devices.This electrical component has a terminal position of 0.It is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Bulk.Due to its reliability, it is operated at a temperature of [0].There should be a Through Holeon the chip.The FPGA belongs to the GAL?22V10 series.There are 24pins on the chip.Its related parts can be found in the [0].High efficiency requires the supply voltage to be maintained at [0].A Through Holeis mounted on this electronic component.There are 24 pins on the device.There is a maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is required for this device to operate.The system runs on a power supply of 5V watts.There is 38.5MHz frequency that can be achieved.There are 11 dedicated inputs used to detect the status of input signals.The output configuration is set to [0].A total of 132product terms are available on it.
GAL22V10D-25LPI Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of -40°C~85°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-25LPI Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-25LPI CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Software-driven hardware configuration
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Programmable polarity
- I2C BUS INTERFACE
- Parity generators
- Discrete logic functions
- Power up sequencing
- Multiple DIP Switch Replacement
- INTERRUPT SYSTEM
