GAL22V10D-25LPN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 38.5MHz |
| Base Part Number | GAL22V10 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 90mA |
| Max Supply Current | 130mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 5.334mm |
| Length | 31.75mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-25LPN Overview
10 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 24-DIP (0.300, 7.62mm)package, you will find it.There are 10 I/Os programmed in it.The termination of a device is set to [0].This electrical part has a terminal position of DUALand is connected to the ground.Power is supplied by a voltage of 5V volts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tube.It operates with the operating temperature of 0°C~75°C TA to ensure its reliability.There should be a Through Holeon the chip.This type of FPGA is a part of the GAL?22V10 series.With 24pins programmed, the chip is ready to use.The GAL22V10indicates that its related parts can be found.This electronic part is mounted in the way of Through Hole.There are 24pins on it.There is a maximum supply voltage of 5.25V.In order for it to operate, a supply voltage of 4.75Vis required.Currently, it is powered by 5Vsources.This frequency can be achieved at 38.5MHz.Input signals are detected by 11dedicated inputs.The output is configured with the value [0].It has been associated with 132product terms.It uses 22inputs in order to function.There is a maximum current supplied for its operation of 130mA.
GAL22V10D-25LPN Features
24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs
GAL22V10D-25LPN Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-25LPN CPLDs applications.
- Dedicated input registers
- Pattern recognition
- PLC analog input modules
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- State machine design
- Timing control
- Code converters
- Reset swapping
- Multiple DIP Switch Replacement
- Boolean function generators
