GAL22V10D-25QJ
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 38.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 55mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
GAL22V10D-25QJ Overview
There are 10 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 28-LCC (J-Lead) package.As you can see, this device has 10 I/O ports programmed into it.Terminations of devices are set to [0].There is a QUADterminal position on the electrical part in question.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tube.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Surface Mount.In terms of FPGAs, it belongs to the GAL?22V10 series.It has 28pins programmed.The GAL22V10indicates that its related parts can be found.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.A Surface Mountis mounted on this electronic component.There are 28 pins embedded in the device.In this case, the maximum supply voltage is 5.25V.A minimum supply voltage of 4.75V is required for this device to operate.A total of 5V power supplies are needed to run it.A frequency of 38.5MHzcan be achieved.The status of input signals is detected by 11dedicated inputs.The output configuration is set to [0].There are 132 product terms associated with it.
GAL22V10D-25QJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-25QJ Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-25QJ CPLDs applications.
- Storage Cards and Storage Racks
- Preset swapping
- Handheld digital devices
- PULSE WIDTH MODULATION (PWM)
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Interface bridging
- Synchronous or asynchronous mode
- Programmable power management
- Address decoders
- USB Bus
