GAL22V10D-25QJN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 38.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-25QJN Overview
There are 10 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 28-LCC (J-Lead) package.It is programmed with 10 I/Os.There is a 28terminations set on devices.This electrical component has a terminal position of 0.An electrical supply voltage of 5V is used to power it.It is included in Programmable Logic Devices.Trayshould be used to package the chip.The temperature at which it operates is set to 0°C~75°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.As part of the GAL?22V10series, it is a type of FPGA.There are 28pins on the chip.You can find its related parts in the [0].If high efficiency is desired, the supply voltage should be kept at [0].In this case, it is mounted by Surface Mount.There are 28pins on it.With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 4.75Vis required.In order for the device to operate, it requires 5V power supplies.The frequency that can be achieved is 38.5MHz.The input signals are detected by 11dedicated inputs.It is configured to produce 10outputs.There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.The inputs employed are 22.Its maximum operating current is 55mA.
GAL22V10D-25QJN Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-25QJN Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-25QJN CPLDs applications.
- Custom state machines
- Handheld digital devices
- Page register
- State machine design
- Battery operated portable devices
- Timing control
- Portable digital devices
- Voltage level translation
- Digital multiplexers
- Programmable polarity
