GAL22V10D-5LJ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Bulk |
| Published | 1996 |
| Series | GAL®22V10 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 140mA |
| Max Supply Current | 150mA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
GAL22V10D-5LJ Overview
There are 10 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 28-LCC (J-Lead) package contains the item.It is programmed with 10 I/Os.There is a 28terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 5Vvolts.This part is included in Programmable Logic Devices.Bulkshould be used to package the chip.The operating temperature of the machine is 0°C~75°C TA to ensure its reliability.Mount the chip by Surface Mount.The GAL?22V10series FPGA is one of these types.The chip is programmed with 28 pins.The GAL22V10indicates that related parts can be found.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.This electronic part is mounted in the way of Surface Mount.A total of 28pins are provided on this board.It operates at a maximum supply voltage of 5.25V volts.The device is designed to operate with a minimal supply voltage of 4.75VV.It runs on 5Vvolts of power.In this case, 200MHzis the frequency that can be achieved.The status of input signals is determined by 11dedicated inputs.This device has 10outputs configured.A total of 132product terms are available on it.22inputs are used by the device.During its operation, the maximum amount of current supplied reaches 150mA.
GAL22V10D-5LJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
GAL22V10D-5LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL22V10D-5LJ CPLDs applications.
- I/O PORTS (MCU MODULE)
- Digital multiplexers
- Portable digital devices
- Reset swapping
- White goods (Washing, Cold, Aircon ,...)
- Address decoding
- Interface bridging
- Address decoders
- Page register
- Programmable power management
