GAL26CV12B-10LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®26CV12 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 105MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL26CV12 |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 12 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 12 |
| Number of Dedicated Inputs | 13 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 122 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
GAL26CV12B-10LJ Overview
12macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.In the 28-LCC (J-Lead)package, you will find it.It is equipped with 12I/O ports.The termination of a device is set to [0].This electrical component has a terminal position of 0.A voltage of 5V is used as the power supply for this device.It belongs to the family [0].It is recommended that the chip be packaged by Tube.To ensure its reliability, the operating temperature is set to [0].It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the GAL?26CV12 series.Chips are programmed with 28 pins.Additionally, this device is capable of displaying [0].Its related parts can be found in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].This electronic part is mounted in the way of Surface Mount.There are 28pins on it.It operates at a maximum supply voltage of 5.25V volts.It is powered by 4.75Vas its minimum supply voltage.It operates from 5V power supplies.In this case, 105MHzis the frequency that can be achieved.Input signals are detected by 13dedicated inputs.It is configured with an output of 12.The product is equipped with 122 product terms.
GAL26CV12B-10LJ Features
28-LCC (J-Lead) package
12 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
12 outputs
GAL26CV12B-10LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL26CV12B-10LJ CPLDs applications.
- D/T registers and latches
- Digital designs
- Discrete logic functions
- State machine design
- Power Meter SMPS
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O PORTS (MCU MODULE)
- Power automation
- Custom shift registers
- Complex programmable logic devices
