GAL26CV12C-7LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | GAL®26CV12 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 142.8MHz |
| Base Part Number | GAL26CV12 |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 12 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 12 |
| Number of Dedicated Inputs | 13 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 122 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| RoHS Status | Non-RoHS Compliant |
GAL26CV12C-7LJ Overview
In the mobile phone network, there are 12macro cells, which are cells with high-power antennas and towers.The item is packaged with 28-LCC (J-Lead).It is equipped with 12I/O ports.The device is programmed with 28 terminations.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 5Vprovides power to the device.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tube.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the GAL?26CV12 series.With 28pins programmed, the chip is ready to use.This device is also capable of displaying [0].The GAL26CV12indicates that related parts can be found.It is mounted by Surface Mount.The pins are [0].This device operates at a voltage of 5.25V when the maximum supply voltage is applied.It operates with the minimal supply voltage of 4.75V.A total of 5V power supplies are needed to run it.This can be achieved at a frequency of 142.8MHz.The status of input signals is determined by 13dedicated inputs.This device is configured with a 12 output.It is associated with 122product terms.
GAL26CV12C-7LJ Features
28-LCC (J-Lead) package
12 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
12 outputs
GAL26CV12C-7LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL26CV12C-7LJ CPLDs applications.
- STANDARD SERIAL INTERFACE UART
- Battery operated portable devices
- LED Lighting systems
- Dedicated input registers
- ROM patching
- Digital systems
- PLC analog input modules
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Reset swapping
- Custom shift registers
