GAL26V12C-10LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®26V12 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL26V12 |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 12 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 12 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 122 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
GAL26V12C-10LJ Overview
Currently, there are 12 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a 28-LCC (J-Lead) package.There are 12 I/Os programmed in it.There are 28 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tube.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.As part of the GAL?26V12series, it is a type of FPGA.In this chip, the 28pins are programmed.According to the GAL26V12, its related parts can be found.High efficiency requires a voltage supply of [0].It is mounted by Surface Mount.It is designed with 28 pins.A maximum voltage of 5.25Vis required for operation.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.A power supply of 5Vis required to operate it.This can be achieved at a frequency of 125MHz.To detect the status of input signals, there are 12dedicated inputs.This device is configured with a 12 output.The product is equipped with 122terms.
GAL26V12C-10LJ Features
28-LCC (J-Lead) package
12 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
12 outputs
GAL26V12C-10LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL26V12C-10LJ CPLDs applications.
- Pattern recognition
- State machine design
- Digital designs
- Protection relays
- Configurable Addressing of I/O Boards
- POWER-SAVING MODES
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Timing control
- Reset swapping
- Code converters
