GAL26V12C-10LJI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®26V12 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | GAL26V12 |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 12 |
| Nominal Supply Current | 150mA |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 12 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 122 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
GAL26V12C-10LJI Overview
12 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a 28-LCC (J-Lead) package.The device has 12inputs and outputs.There are 28 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 5V voltage supply for this device.There is a part included in Programmable Logic Devices.Package the chip by Tube.To ensure its reliability, the operating temperature is set to [0].Surface Mountshould be used for mounting the chip.In this case, it is a type of FPGA belonging to the GAL?26V12 series.In this chip, the 28pins are programmed.The GAL26V12shows its related parts.A high level of efficiency can be achieved by maintaining the supply voltage at [0].This electronic part is mounted in the way of Surface Mount.It is designed with 28 pins.This device operates at a voltage of 5.5Vas its maximum supply voltage.With a minimal supply voltage of [0], it operates.It runs on a voltage of 5Vvolts.A frequency of 125MHzcan be achieved.The status of input signals is detected by 12dedicated inputs.This device is configured to output [0].It is equipped with 122 product terms.
GAL26V12C-10LJI Features
28-LCC (J-Lead) package
12 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
12 outputs
GAL26V12C-10LJI Applications
There are a lot of Lattice Semiconductor Corporation GAL26V12C-10LJI CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- Programmable polarity
- Interface bridging
- DDC INTERFACE
- Power up sequencing
- Pattern recognition
- Random logic replacement
- USB Bus
- Preset swapping
- Power Meter SMPS
