GAL26V12C-15LJ
| Parameters | |
|---|---|
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 12 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 122 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®26V12 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 83.3MHz |
| Base Part Number | GAL26V12 |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 12 |
| Nominal Supply Current | 105mA |
| Propagation Delay | 15 ns |
GAL26V12C-15LJ Overview
There are 12 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the 28-LCC (J-Lead) package.The device is programmed with 12 I/Os.There are 28 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.There is 5V voltage supply for this device.This part is part of the family [0].The chip should be packaged by Tube.Due to its reliability, it is operated at a temperature of [0].Mount the chip by Surface Mount.This type of FPGA is a part of the GAL?26V12 series.In this chip, the 28pins are programmed.The GAL26V12indicates that its related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].This electronic part is mounted in the way of Surface Mount.28pins are included in its design.A maximum voltage of 5.25Vis required for operation.Despite its minimal supply voltage of [0], it is capable of operating.The system runs on a power supply of 5V watts.A frequency of 83.3MHzcan be achieved.There are 12 dedicated inputs used to detect the status of input signals.There is an output of 12configured on the device.The product has 122 product terms.
GAL26V12C-15LJ Features
28-LCC (J-Lead) package
12 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
12 outputs
GAL26V12C-15LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL26V12C-15LJ CPLDs applications.
- Discrete logic functions
- I2C BUS INTERFACE
- Digital multiplexers
- ON-CHIP OSCILLATOR CIRCUIT
- STANDARD SERIAL INTERFACE UART
- Cross-Matrix Switch
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Page register
- INTERRUPT SYSTEM
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
