banner_page

GAL26V12C-20LJI

5V 1.27mm PMIC GAL?26V12 Series GAL26V12 28 Pin 62.5MHz 5V 28-LCC (J-Lead)


  • Manufacturer: Lattice Semiconductor Corporation
  • Nocochips NO: 477-GAL26V12C-20LJI
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 833
  • Description: 5V 1.27mm PMIC GAL?26V12 Series GAL26V12 28 Pin 62.5MHz 5V 28-LCC (J-Lead) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2000
Series GAL®26V12
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Supply Voltage 5V
Terminal Pitch 1.27mm
Frequency 62.5MHz
Base Part Number GAL26V12
Pin Count 28
Number of Outputs 12
Operating Supply Voltage 5V
Power Supplies 5V
Programmable Type EE PLD
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of I/O 12
Nominal Supply Current 150mA
Propagation Delay 20 ns
Turn On Delay Time 20 ns
Architecture PAL-TYPE
Output Function MACROCELL
Number of Macro Cells 12
Number of Dedicated Inputs 12
Voltage Supply - Internal 4.5V~5.5V
Number of Product Terms 122
Height Seated (Max) 4.572mm
Length 11.5062mm
Width 11.5062mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant

GAL26V12C-20LJI Overview


This network has 12macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 28-LCC (J-Lead).This device has 12 I/O ports programmed into it.There are 28 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a QUADterminal position on the electrical part in question.There is 5V voltage supply for this device.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tube.To ensure reliability, the device operates at a temperature of [0].It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of GAL?26V12series FPGA.The chip is programmed with 28 pins.Its related parts can be found in the [0].Optimal efficiency requires a supply voltage of [0].In this case, it is mounted by Surface Mount.The device is designed with pins [0].A maximum voltage of 5.5Vis required for operation.The device is designed to operate with a minimal supply voltage of 4.5VV.A total of 5V power supplies are needed to run it.In this case, 62.5MHzis the frequency that can be achieved.A total of 12dedicated inputs are available for detecting the status of input signals.It is configured with an output of 12.It is equipped with 122 product terms.

GAL26V12C-20LJI Features


28-LCC (J-Lead) package
12 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
12 outputs

GAL26V12C-20LJI Applications


There are a lot of Lattice Semiconductor Corporation GAL26V12C-20LJI CPLDs applications.

  • Synchronous or asynchronous mode
  • I/O PORTS (MCU MODULE)
  • Digital designs
  • State machine control
  • D/T registers and latches
  • Multiple Clock Source Selection
  • Complex programmable logic devices
  • Bootloaders for FPGAs
  • Preset swapping
  • Discrete logic functions

Write a review

Note: HTML is not translated!
    Bad           Good