GAL26V12C-7LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | GAL®26V12 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 142.8MHz |
| Base Part Number | GAL26V12 |
| Pin Count | 28 |
| Number of Outputs | 12 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 12 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 7.5 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 12 |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 122 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| RoHS Status | Non-RoHS Compliant |
GAL26V12C-7LJ Overview
This network has 12macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 28-LCC (J-Lead).There are 12 I/Os on the board.The device is programmed with 28 terminations.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tube.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Surface Mountshould be used for mounting the chip.As part of the GAL?26V12series, it is a type of FPGA.It has 28pins programmed.According to the GAL26V12, its related parts can be found.Surface Mountis the mounting point of this electronic part.It is designed with 28 pins.There is a maximum supply voltage of 5.25Vwhen the device is operating.In order for it to operate, a supply voltage of 4.75Vis required.It runs on a voltage of 5Vvolts.This can be achieved at a frequency of 142.8MHz.The input signals are detected by 12dedicated inputs.There is an output of 12configured on the device.There are 122 product terms associated with it.
GAL26V12C-7LJ Features
28-LCC (J-Lead) package
12 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
12 outputs
GAL26V12C-7LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL26V12C-7LJ CPLDs applications.
- State machine control
- Configurable Addressing of I/O Boards
- Parity generators
- Cross-Matrix Switch
- Digital designs
- Multiple Clock Source Selection
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Pattern recognition
- Bootloaders for FPGAs
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
