Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Weight |
409.6mg |
Operating Temperature |
-40°C~105°C |
Packaging |
Tube |
Published |
2016 |
Series |
FPS™ |
JESD-609 Code |
e3 |
Feature |
Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Terminal Finish |
Tin (Sn) |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
JESD-30 Code |
R-PDIP-T8 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Interface |
USB |
Analog IC - Other Type |
ANALOG CIRCUIT |
Current - Output (Max) |
2.7A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
2.5V~25V |
Max Supply Current |
3.8mA |
Input Type |
Differential |
Switch Type |
General Purpose |
Ratio - Input:Output |
2:1 |
Voltage - Load |
2.3V~5.5V |
Max Output Power |
16W |
Fault Protection |
Reverse Current |
Max Duty Cycle |
90 % |
Rds On (Typ) |
95m Ω |
Min Breakdown Voltage |
700V |
Height Seated (Max) |
5.334mm |
Length |
9.5885mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
GF001HN Overview
It is packaged in the manner of a Tube.The 8-DIP (0.300, 7.62mm) package contains it.Mounting type Through Hole is selected for the LED driving board.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~105°C.The LED driver has 1 outputs.It uses a supply voltage of 2.5V~25V to operate.There is a maximum output voltage of P-Channel volts.Slew Rate Controlled features are available on the lighting driver.As a result, there are 8 terminations.Currently, the lighting driver has a total of 1 functions.The LED driver output is limited to 2.7AV.A supply voltage of 15V leads to high efficiency.The lighting driver is mounted in the direction of Through Hole.It belongs to the FPS? series.In this lighting driver, ANALOG CIRCUIT is the analog IC.It has a maximum current requirement of 3.8mA.
GF001HN Features
Supplied from 15V
GF001HN Applications
There are a lot of ON Semiconductor GF001HN Power Switches ICs applications.
- Various applications equipped with buttons
- USB3.1 Power Delivery
- PC Cards
- Solid-State Drives
- Wireless Modem Data Cards
- Handheld Devices
- Wireless Headsets
- Hot Swap
- Low Voltage I/O System Power
- Hot Swap