banner_page

GTLP16612MTD

GTLP16612MTD datasheet pdf and Logic - Universal Bus Functions product details from ON Semiconductor stock available at Noco


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-GTLP16612MTD
  • Package: 56-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 738
  • Description: GTLP16612MTD datasheet pdf and Logic - Universal Bus Functions product details from ON Semiconductor stock available at Noco(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-TFSOP (0.240, 6.10mm Width)
Number of Pins 56
Weight 740mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74GTLP
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Additional Feature TRANSLATES BETWEEN GTL SIGNAL LEVELS AND LVTTL OR 5V TTL SIGNAL LEVELS
Technology CMOS
Voltage - Supply 3.15V~3.45V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number 74GTLP16612
Number of Elements 1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.45V
Number of Channels 18
Number of Circuits 18-Bit
Number of Ports 2
Number of Bits 18
Propagation Delay 6.8 ns
Quiescent Current 30mA
Turn On Delay Time 9.8 ns
Logic Function Transceiver
Direction Bidirectional
Output Characteristics OPEN-DRAIN/3-STATE
Current - Output High, Low 32mA 32mA
Logic Type Universal Bus Transceiver
Radiation Hardening No
RoHS Status RoHS Compliant

GTLP16612MTD Overview


There is an embedded version of it in the 56-TFSOP (0.240, 6.10mm Width) package. Tube is how it's packaged. It achieves superior flexibility through 18-Bit circuits. Logic type Universal Bus Transceiver describes this electrical device. In this case, the electronic part is mounted in the direction of Surface Mount. A higher operating temperature than -40°C~85°C is recommended. Due to its high and low output current options, 32mA 32mA's maximum level of flexibility is achieved when it comes to designing its features. An FPGA belonging to the 74GTLP series is a type of FPGA. 3.15V~3.45V is the supply voltage. As it belongs to the 74GTLP16612 family, it should be taken into consideration. It is possible to use 56 terminations, which are the ends of a transmission line which should be connected to a device whose characteristic impedance matches that of the transmission line. Normal operation requires an output voltage above 3.3V. A 18-Bit electronic part was designed for this application. 2 terminations, on the other hand, are the practice of terminating a transmission line with a device that matches its characteristic impedance. The electronic part is mounted in Surface Mount-direction. 56 pins are used in the design of this board. The maximal supply voltage (Vsup) reaches 3.45V. A 1-element is included in it. Moreover, it is characterized by TRANSLATES BETWEEN GTL SIGNAL LEVELS AND LVTTL OR 5V TTL SIGNAL LEVELS as well. The number of channels is growing strong/weak: 18. The device consumes 30mA of quiescent current without being affected by external factors.

GTLP16612MTD Features


56-TFSOP (0.240, 6.10mm Width) package
74GTLP series
74GTLP16612 family
56 pins
1 elements

GTLP16612MTD Applications


There are a lot of ON Semiconductor GTLP16612MTD Universal Bus Functions applications.

  • Computer
  • Flip flops
  • automatic temperature control circuits
  • Overcurrent/Short circuit protection
  • Square wave oscillators
  • Photovoltaic grid-connected power system
  • Solar energy generation
  • Burglar alarms and buzzers
  • Instrumentation Systems
  • Electric shaver

Write a review

Note: HTML is not translated!
    Bad           Good