GTLP16612MTDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Weight | 740mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74GTLP |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Additional Feature | TRANSLATES BETWEEN GTL SIGNAL LEVELS AND LVTTL OR 5V TTL SIGNAL LEVELS |
| Technology | CMOS |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74GTLP16612 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Number of Channels | 18 |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 6.8 ns |
| Quiescent Current | 30mA |
| Turn On Delay Time | 9.8 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Logic Type | Universal Bus Transceiver |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
GTLP16612MTDX Overview
A copy of it is embedded in the package 56-TFSOP (0.240, 6.10mm Width). The package is packaged in the way that Tape & Reel (TR) would package it. A 18-Bit circuit achieves its superior flexibility by using 18-Bit components. A Universal Bus Transceiver logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. A higher operating temperature than -40°C~85°C is recommended. The high/low output current of 32mA 32mA enables maximum design flexibility. An FPGA belonging to the 74GTLP series is a type of FPGA. The supply voltage is 3.15V~3.45V. As it belongs to the 74GTLP16612 family, it should be taken into consideration. The 56 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. It is important to keep the supply voltage above 3.3V for normal operation. 18 Bits were used in the design of this electronic part. An example of this is through the use of 2 terminations, where a particular device is used to end a transmission line with an impedance matching device, fitted with its characteristic impedance. Mounted in the way of Surface Mount is this electronic part. 56 pins are used in its design. A maximum supply voltage (Vsup) is reached at 3.45V. It consists of 1 elements. TRANSLATES BETWEEN GTL SIGNAL LEVELS AND LVTTL OR 5V TTL SIGNAL LEVELS is one of the characteristics of this type of system as well. The number of channels is growing strong/weak: 18. There is no external influence on how it consumes 30mA of quiescent current.
GTLP16612MTDX Features
56-TFSOP (0.240, 6.10mm Width) package
74GTLP series
74GTLP16612 family
56 pins
1 elements
GTLP16612MTDX Applications
There are a lot of ON Semiconductor GTLP16612MTDX Universal Bus Functions applications.
- MPPT function (maximum power point tracking)
- Freezer warning buzzer circuits
- Electronic and electrical project circuits
- Automatic digital control circuits
- Massager
- Calculator
- Safety thermostat
- Grid adaptation function
- Troubleshooting & Judgment
- Memory
