HA9P4905-5Z
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 28V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Number of Channels | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 5V |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Current - Output | 50mA |
| Quiescent Current | 20mA |
| Response Time | 130 ns |
| Current - Input Bias | 150nA |
| Input Offset Voltage (Vos) | 7.5mV |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Max Dual Supply Voltage | 15V |
| Min Dual Supply Voltage | 2.5V |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Max Input Current | 150nA |
| Dual Supply Voltage | 9V |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
HA9P4905-5Z Overview
For convenience, it is packaged in SOIC .The comparator has a total of 16 terminals.The electrical component here belongs to the Comparator family.Supplied by 15V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .The comparator is equipped with 16 pins.In this comparator, the quiescent current is 20mA .There is a Surface Mount for mounting it on a PCB or other board.The nominal supply current of the device should be 20mA for normal use.If the current supply exceeds 20mA , the comparator might be damaged.Electronic comparator is possible to input a maximum of 150nA current into the device.A voltage gain of 112.04dB can be determined from the voltage formula for the part.An increase in temperature over 75°C is not recommended.Lower temperatures than 0°C are unsuitable for it.Comparator electronics is specified that the comparator's maximum supply voltage is 30V .There is a minimum supply voltage of 5V for this comparator.The output quality is maintained by the cooperation of 4 channels.In order to operate normally, a supply voltage of 0 is required.The output current of this device is rated 50mA .
HA9P4905-5Z Features
General Purpose IC
Quiescent Current: 20mA
Voltage Gain: 112.04dB
HA9P4905-5Z Applications
There are a lot of Intersil (Renesas Electronics America) HA9P4905-5Z linear comparators applications.
- Mobile Communications
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- Handheld Instruments
- Consumer Medical Electronics
- Wireless Base Stations
- Analog front end
- Battery-Powered Electronics
- Window Comparators
- Self-diagnostics
