HAL204JQ-K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 Short Body |
| Supplier Device Package | TO-92UA-5 |
| Operating Temperature | -40°C~140°C TA |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| Series | HAL® |
| Feature | Temperature Compensated |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 140°C |
| Min Operating Temperature | -40°C |
| Technology | Hall Effect |
| Voltage - Supply | 3.8V~24V |
| Function | Latch |
| Current - Supply (Max) | 5.2mA |
| Output Type | Open Drain |
| Max Output Current | 50mA |
| Polarity | South Pole |
| Polarization | South Pole |
| Current - Output (Max) | 50mA |
| Max Supply Current | 5.2mA |
| Logic Function | Latch |
| Sensing Method | Hall Effect |
| Test Condition | 25°C |
| Sensing Range | 18.5mT Trip, -15mT Release |
| RoHS Status | RoHS Compliant |
HAL204JQ-K Overview
Magnetic switches are packaged in Tape & Box (TB) for protection against damage. For safety reasons, the magnetic switches are packaged in TO-226-3, TO-92-3 Short Body packages. The magnetic switches can supply 5.2mA as the maximum current for good performance. When operating, these switches can output a maximum current of 50mA. The maximum current for magnetic switches should be 50mA to be output. This switch can supply a maximum of 5.2mA amps. You can set the maximum operating temperature of magnetic switches to 140°C. In order for this magnetic switch to work, the operating temperature must not be below -40°C.
HAL204JQ-K Features
Packaging: Tape & Box (TB)
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 3.8V~24V
Operating Temperature: -40°C~140°C TA
Mounting Type: Through Hole
Output Type: Open Drain
Maximum Supply Current: 5.2mA
HAL204JQ-K Applications
There are a lot of TDK-Micronas GmbH HAL204JQ-K Magnetic Switches applications.
- Transmission
- Reed switch replacement
- Speed and RPM (revolutions per minute) sensing
- Localization of ferromagnetic
- Position and limit sensing
- Mixers
- CNC machine tools
- Shafts in transmissions, hydraulic motors, pumps and gear boxes
- Factory automation
- Angle sensing
