HC55142IMZ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 28 |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Analog Transmission Interfaces |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 1.5W |
| Operating Supply Current | 2.25mA |
| Nominal Supply Current | 2.7mA |
| Telecom IC Type | SLIC |
| Battery Feed | CONSTANT CURRENT/RESISTIVE |
| Hybrid | 2-4 CONVERSION |
| Battery Supply | -24 AND -48 V |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
HC55142IMZ Overview
A PLCC package is used to reduce board space requirements.A Surface Mount-axis mounts telecom switching.In telecom switching configuration, 28 terminations are present.The voltage it operates at is 5V.An interface with 28 pins is present on this telecom interface.As its telecom IC type, it uses SLIC.To offer designers much flexibility, it is powered by 5V voltage.To give designers much flexibility, it uses 2.25mA as the supply current.The telecommunications device is part of the Analog Transmission Interfaces subcategory.Ensure normal operation by setting the temperature to -40°C minimum.85°C is set to the maximum value to ensure normal operation.When designing, 1 functions are configured.Ideally, the voltage should be at least 4.75V.If 5.25V is higher than the supplied voltage, telecommunications device should be lower.Its pin configuration is determined by 28 telecom product pins.Using 1 channels, it achieves its superior flexibility.
HC55142IMZ Features
Available in the PLCC package
SLIC as telecom IC type
Operating supply voltage of 5V
Operating supply current of 2.25mA
HC55142IMZ Applications
There are a lot of Intersil (Renesas Electronics America) HC55142IMZ Telecom applications.
- NIU
- Digital Access Cross-connect System (DACs)
- T1/E1/J1 add/drop multiplexers (MUX)
- Routers
- CSU/DSU E1/T1/J1 Interface
- Multichannel DS1 Test Equipment
- Fiber Optic Terminals
- Inverse Multiplexing for ATM (IMA)
- PDH Multiplexers
- Wireless base stations
