HCF4013YM013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 259.19969mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100, 4000 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | HCF4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 24MHz |
| Propagation Delay | 90 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 150 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 6.8mA 6.8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Prop. Delay@Nom-Sup | 300 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4013YM013TR Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. Package Cut Tape (CT)embeds it. Differentialis the output configured for it. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 3V~20V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. JK flip flop is a part of the Automotive, AEC-Q100, 4000series of FPGAs. A frequency of 24MHzshould be the maximum output frequency. D latch consists of 2 elements. Terminations are 14. The HCF4013 family contains it. A voltage of 5V provides power to the D latch. A 5pFfarad input capacitance is provided by this T flip flop. It is mounted in the way of Surface Mount. This board is designed with 14pins on it. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. A normal operating voltage (Vsup) should remain above 3V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 4 output lines in this JK flip flop. Currently, there are 8 lines of input. There is a consumption of 20μAof quiescent current from it.
HCF4013YM013TR Features
Cut Tape (CT) package
Automotive, AEC-Q100, 4000 series
14 pins
HCF4013YM013TR Applications
There are a lot of STMicroelectronics HCF4013YM013TR Flip Flops applications.
- Frequency Divider circuits
- ESD protection
- Event Detectors
- Matched Rise and Fall
- Supports Live Insertion
- Circuit Design
- Frequency Dividers
- Functionally equivalent to the MC10/100EL29
- Control circuits
- CMOS Process
