HCF4018BM1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SO |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Number of Bits | 5 |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 400 ns |
| Logic Function | Counter |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 5 |
| Count Direction | UP |
| Max Frequency@Nom-Sup | 3000000Hz |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
HCF4018BM1 Overview
This device is supplied in the SO package. Using 16terminations, it can be configured. The supply voltage of 5V enables it operate in a fully flexible way. The device has 1terminations. There are 16pins on all components. It is packaged in a manner consistent with Rail/Tube. In the circuit, there are 16pins that connect other parts. It is mounted in the manner of [0]. In the device, the information consists of 5 bits. A temperature grade of MILITARYis specified for this device. To operate, the device requires a voltage of [0]. This device operates at 125°C°C for extended periods of time with acceptable electrical stability. An operating temperature range is specified with a lower limit generally set at -55°C degrees Celsius. The maximum voltage that can be applied to the device is 20V. A minimum voltage of 3Vis available for the device. With 5output lines, it is equipped with.
HCF4018BM1 Features
Embedded in the SO package
Operating supply voltage of 18V
HCF4018BM1 Applications
There are a lot of STMicroelectronics HCF4018BM1 Counters & Dividers applications.
- Dual Up Counters
- ANALOG SIGNAL PROCESSING
- Clocks
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- TRUE RMS-TO-DC CONVERSION
- Timers
- Control counters
- Divide-by-N counting
- MULTIPLICATION
- Binary counter/decoder
