HCF40193BEY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HCF4019 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 180 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Output Lines | 4 |
| fmax-Min | 5.5 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 2000000Hz |
| Count Rate | 11MHz |
| Timing | Synchronous |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF40193BEY Overview
It is a device supplied in the 16-DIP (0.300, 7.62mm) package. The configuration of this device is based on 16terminations. The supply voltage of 5V enables it operate in a fully flexible way. 1 elements are interconnected in wires. There are 16pins on all components. It is packaged in a manner consistent with Tube. A circuit is connected to other components by 16pins. The device is mounted in the direction of [0]. This device is a member of the 4000Bseries and is well suited for a wide range of applications. A logic type of Binary Counter is adopted. The operating temperature should be set at -55°C~125°C. Using a Through Holemounting type, it is mounted. In the presence of the supply voltage of [0], it can operate more reliably. In this device, there is information of 4bits. These electronic devices have many important features, and TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCKis one of them. Under its base part number of [0], you will find additional related parts. In order to operate, it requires a voltage of [0]. The minimum supply voltage (Vsup) is as low as 3V. The maximum supply voltage (Vsup) is up to 20V. The device has a total of 4 output lines.
HCF40193BEY Features
Embedded in the 16-DIP (0.300, 7.62mm) package
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Operating supply voltage of 9V
HCF40193BEY Applications
There are a lot of STMicroelectronics HCF40193BEY Counters & Dividers applications.
- Binary counter/decoder
- SQUARE ROOT
- counting/frequency sy nthesizers-BCD output
- Programmable binary and decade
- Frequency division
- Time delay circuits
- Timers
- Fixed and programmable counters greater than 10
- Counter control/timers
- Dual Up Counters
