HCF4028M013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | HCF4028 |
| Pin Count | 16 |
| Number of Outputs | 10 |
| Number of Elements | 1 |
| Circuit | 1 x 4:10 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Power Dissipation | 100mW |
| Number of Bits | 3 |
| Propagation Delay | 350 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 350 ns |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 4 |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Voltage Supply Source | Dual Supply |
| Input Conditioning | STANDARD |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4028M013TR Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The analog IC used in the multiplexers can be referred to as Decoder.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 3V~20V voltage.Multiplexers of the 4000B series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number HCF4028 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 5V voltage.A component pin count of 16 is found on this turn signal switch.As the end of conductors, it uses GULL WING.There is a supply type of Dual employed as part of this supply.The board is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer contains 3 bits.The minimal supply voltage (Vsup) should be kept at 3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 20V to prevent unnecessary failures.As a result, the turn signal switch consists of 10 outputs.Despite not interacting with external factors, it consumes 100μA current of multiplexer ic.There are 4 inputs provided in this multiplexer.The switches packaging is based on TAPE AND REEL.The mux switch configuration contains 1 elements.
HCF4028M013TR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
HCF4028M013TR Applications
There are a lot of STMicroelectronics HCF4028M013TR Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- War field flying robot with a night vision flying camera
- Telephone network
- CNC machines
- LVDS
- Computer memory
- Enabling block of memory depending on address in memory chips
- Automation system
- Combinational circuit
- Seven segment displays
