HCF4040BEY
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 24MHz |
| Base Part Number | HCF4040 |
| Pin Count | 16 |
| Operating Supply Voltage | 18V |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 4.59mm |
| Length | 20mm |
| Width | 7.1mm |
HCF4040BEY Overview
This is a device supplied in the 16-DIP (0.300, 7.62mm) package. There are 16 terminations used for its configuration. 5Vis fully flexible due to its voltage supply. A total of 16pins are present on all components. In this case, it is packaged as Tube. In the circuit, there are 16pins that connect other components. Using [0], it can be mounted. Due to its membership in the 4000Bseries, it is suitable for a variety of applications. The logic type of Binary Counter is adopted. -55°C~125°Cshould be the operating temperature. In this case, it is mounted with a Through Holetype. It is able to operate with higher reliability when the supply voltage of 3V~20V is provided. Each element in the array stores 12 bits. Based on Pbfree code, this may result in yes. Among its base part number [0], you will find additional parts that are related. To operate, it requires a supply voltage of 18V volts. As low as 3V Vsup is the minimum supply voltage. In this case, the frequency is 24MHz Hz. Typically, the supply voltage (Vsup) is limited to 20V. There are a total of 1lines for inputting binary data.
HCF4040BEY Features
Embedded in the 16-DIP (0.300, 7.62mm) package
12 bits per element
Operating supply voltage of 18V
Frequency of 24MHz
HCF4040BEY Applications
There are a lot of STMicroelectronics HCF4040BEY Counters & Dividers applications.
- Signal gating
- LINEARIZATION
- Dual Up Counters
- SQUARING
- Time delay circuits
- Frequency dividers
- Programmable binary and decade
- TRUE RMS-TO-DC CONVERSION
- Counter control/timers
- DIVISION
