Parameters |
Package / Case |
SO |
Surface Mount |
YES |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
16 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
18V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
20V |
Min Supply Voltage |
3V |
Load Capacitance |
50pF |
Number of Bits |
12 |
Propagation Delay |
130 ns |
Logic Function |
Counter |
Trigger Type |
NEGATIVE EDGE |
Number of Input Lines |
1 |
Number of Output Lines |
12 |
Count Direction |
UP |
Max Frequency@Nom-Sup |
3500000Hz |
Load/Preset Input |
NO |
Mode of Operation |
ASYNCHRONOUS |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
RoHS Compliant |
HCF4040BM1 Overview
A device of this type is supplied in a package of type [0]. This configuration uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. A total of 16pins are available on all components. In the device, the information consists of 12 bits. This device is manufactured in the temperature grade of MILITARY. The device requires a supply voltage of [0]. The electrical characteristics remain stable at maximum temperature 125°Cfor extended periods. It operates within a specified temperature range, with the lower limit typically set at -55°C degrees Celsius. The maximum voltage that can be applied to the device is 20V. Devices are capable of operating at a minimum voltage of 3V. 1input lines are used to input binary data as on/off signals. The device is equipped with a 12output line.
HCF4040BM1 Features
Embedded in the SO package
Operating supply voltage of 18V
HCF4040BM1 Applications
There are a lot of STMicroelectronics HCF4040BM1 Counters & Dividers applications.
- TRUE RMS-TO-DC CONVERSION
- Digital multiplexing and demultiplexing
- Fixed and programmable counters greater than 10
- Control counters
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Communications Digital Frequency Synthesizers;
- Fixed or Programmable Frequency Division
- Clocks
- Divide-by-N counting
- counting/frequency sy nthesizers-BCD output