HCF4051BM1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | MOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HCF4051 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80nA |
| Power Dissipation | 500mW |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 720 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 60MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 450 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 5pF |
| On-state Resistance Match-Nom | 10Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -40dB @ 3MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~20V |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4051BM1 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 8 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. 1 circuits are used in this analogue multiplexer. Search with HCF4051 if you are looking for analog multiplexer variants. There is 280Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 20V. An effective Dual supply digital multiplexer. There should be 3V voltage fed to the electrical part below 3V. 80nA current would be enough for this multiplexer to operate. The voltage required by this switch device is 3V~20V, draining from a single voltage supply. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. The electrical component supports 8 inputs. There are various bandwidths available for data transfer.
HCF4051BM1 Features
8 Channels
80nA Supply Current
Bandwidth: 60MHz
HCF4051BM1 Applications
There are a lot of STMicroelectronics HCF4051BM1 Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- High speed data transmission line cards
- DSUs
- Battery Powered Systems
- Industrial
- Fiber to the Home
- SONET
- Audio/video switches
- Cell phones
- Digital access cross connects
