HCF4051YM013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 280Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HCF4051 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 500mW |
| Propagation Delay | 30 ns |
| Supply Current-Max (Isup) | 3mA |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 5pF |
| Number of Output Lines | 8 |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -40dB @ 3MHz |
| Voltage - Supply, Single (V+) | 3V~20V |
| Height | 1.65mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
HCF4051YM013TR Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Cut Tape (CT). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 8:1. Operational temperature extended around -40°C~85°C TA. In total, 16 terminations have occurred. A 8 channel electronic part produces high-quality output. 1 circuits are used in this analogue multiplexer. Use HCF4051 to search for variants of the digital switches. As far as internal resistance is concerned, it has 280Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 20V. The lowest voltage fed to the electronic component should be 3V. Analogue multiplexers require a 3V~20V voltage to drain from a single voltage supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. The Automotive, AEC-Q100 series includes it.
HCF4051YM013TR Features
8 Channels
-3db Bandwidth: 60MHz
HCF4051YM013TR Applications
There are a lot of STMicroelectronics HCF4051YM013TR Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Isolation
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Audio signal routing
- SONET/SDH ADM
- Intelligent PBX
- Avionics and Military Systems
- Digital Cross-Connects
- Central office
- Avionics
