HCF4052BEY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 125Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | MOS |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | HCF4052 |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 80nA |
| Power Dissipation | 500mW |
| Propagation Delay | 60 ns |
| Quiescent Current | 80nA |
| Turn On Delay Time | 720 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual |
| Bandwidth | 60MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 450 ns |
| Number of Gates | 1 |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 5pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SP4T |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -40dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~20V |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
HCF4052BEY Overview
Presented in 16-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tube. In Through Hole, this analog switch is mounted. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 5V voltage supply. The electronic part body is injected with 16 pins. The analog switch ics are built using SP4T switching circuits. A 2 circuit is present in this switch device. Look for analog switch ic variants by searching with HCF4052. Analog switches have 125Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 20V to a switch device. The analog switch ic is of the Dual supply type and is cost-effective. 3V should be the lowest voltage fed to the electronic component. For this digital switch to work, 80nA current would suffice. Using only a single voltage supply, this analog switch requires 3V~20V voltage. It is integrated with a DIFFERENTIAL MULTIPLEXER analog IC. The electrical component supports 8 inputs. The data can be transferred over a wide range of bandwidths, called 60MHz bandwidths.
HCF4052BEY Features
4 Channels
Switch Circuit: SP4T
80nA Supply Current
Bandwidth: 60MHz
HCF4052BEY Applications
There are a lot of STMicroelectronics HCF4052BEY Analog Switches & Multiplexers ICs applications.
- Data switching
- Cross Connects
- Industrial and process control systems
- Imaging
- CSU
- Residential Gateways, Home Gateway/Router
- Digital cross connects (DSX-1)
- Precision test equipment
- Video signal routing
- Multiplexers
