HCF4052M013TR

SP4T 280Ohm Analog Switches BREAK-BEFORE-MAKE HCF4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: STMicroelectronics
Nocochips NO: 761-HCF4052M013TR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 373
Description: SP4T 280Ohm Analog Switches BREAK-BEFORE-MAKE HCF4052 16 Pins 100nA 5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	80nA
Power Dissipation	500mW
Propagation Delay	60 ns
Quiescent Current	80nA
Turn On Delay Time	720 ns
Logic Function	Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs	8
Supply Type	Dual
Bandwidth	60MHz
Supply Current-Max (Isup)	3mA
Turn-Off Delay Time	450 ns
On-State Resistance (Max)	280Ohm
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.2pF 5pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-40dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3V~20V
Drain to Source Resistance	1.05kOhm
Signal Current-Max	0.01A
Height	1.65mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	1.05kOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	MOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	HCF4052
Pin Count	16
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	20V
Min Supply Voltage	3V

HCF4052M013TR Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. A 5V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. On the other hand, analog switches can be constructed using SP4T switching circuits. A 2 circuit is present in this switch device. Using the HCF4052 search parameter, you can discover variants of the switch. It has an internal resistance of 1.05kOhm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 20V volts for the multiplexer. The analog switch ic is of the Dual supply type and is cost-effective. 3V should be the lowest voltage fed to the electronic component. 80nA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 3V~20V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. The electrical component supports 8 inputs. There are various bandwidths available for data transfer. Resistivity from Drain to Source is 1.05kOhm for this electronic part.