HCF4066BEY
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 90.718474g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bilateral, FET Switches |
| Resistance | 470Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | MOS |
| Voltage - Supply | 3V~20V |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | HCF4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 20V |
| Power Supplies | 3/15V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Nominal Supply Current | 20nA |
| Power Dissipation | 200mW |
| Max Supply Current | 5μA |
| Throw Configuration | SPST |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 70 ns |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 15 ns |
| Dual Supply Voltage | 7.5V |
| Off-state Isolation-Nom | 50 dB |
| Voltage Supply Source | Dual Supply |
| On-state Resistance Match-Nom | 5Ohm |
| Drain to Source Resistance | 240Ohm |
| Normal Position | NO |
| Height | 5.1mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4066BEY Overview
Due to the fact that it is provided in the 14-DIP (0.300, 7.62mm), digital switch allows the board to be compacted.In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the method of Through Hole.A digital IC Bilateral, FET Switches is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.When digital controlled switch operates at 3V~20V, designers have superior flexibility.The multiplexers from 4000B series can be used for a wide range of applications.There are 14 terminations included in its basic configuration.The base part number is HCF4066, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.Currently, this turn signal switch has a total of 14 component pins.The supply type of this multiplexer ic is Dual, Single.A configuration of 14 pins is used.The mount is in Through Hole.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 3V.Vsup (maximum supply voltage) should be kept as 20V to prevent unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 3/15V.This is a signal switch that is categorized as Multiplexer or Switches.With a resistance of 470Ohm, it operates.A total of 4 transmission channels are available in the turn signal switch's circuit.
HCF4066BEY Features
Supplied in the 14-DIP (0.300, 7.62mm) package
Adopting a supply type of Dual, Single
Power supplies of 3/15V
HCF4066BEY Applications
There are a lot of STMicroelectronics HCF4066BEY Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Injectors
- VGA
- Make full adder
- Code conversion
- Robotic vehicles
- Data transfer
- GLAN
- Communication system
- HDMI applications
