HCF4097M013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 240Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HCF4097 |
| Pin Count | 24 |
| Power Supplies | 5/15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 80nA |
| Power Dissipation | 200mW |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 650 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual |
| Bandwidth | 60MHz |
| Supply Current-Max (Isup) | 3mA |
| Turn-Off Delay Time | 440 ns |
| On-State Resistance (Max) | 240Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100μA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 5pF |
| On-state Resistance Match-Nom | 10Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -40dB @ 1MHz |
| Voltage - Supply, Single (V+) | 3V~20V |
| Signal Current-Max | 0.01A |
| Length | 15.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
HCF4097M013TR Overview
As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 8:1. Operation at a temperature around -55°C~125°C TA. 24 terminations have been made so far. As a result of its 8 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 24 series. The multiplexer consists of 2 circuits. If you are looking for variants of the digital switch, trying search with HCF4097. Internally, this switch multiplexer has a resistance of 240Ohm. The functions of 24 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 20V in normal situations. Analogue multiplexers of the Dual supply type that are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 3V. This multiplexer would work with 80nA current. Using only a single voltage supply, this analog switch requires 3V~20V voltage. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Operating the 16 inputs requires 16 inputs. In 60MHz-bandwidths, data can be transferred.
HCF4097M013TR Features
8 Channels
80nA Supply Current
Bandwidth: 60MHz
HCF4097M013TR Applications
There are a lot of STMicroelectronics HCF4097M013TR Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Ultrasound
- High reliability control systems
- Battery Powered Systems
- Multi-Line E1 Interface Cards
- Battery Powered Instruments
- PDH Multiplexers
- PCMCIA cards
- Isolation
- Cable PC
