HCF4099M013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HCF4099 |
| Pin Count | 16 |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 20V |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Number of Bits | 8 |
| Propagation Delay | 450 ns |
| Quiescent Current | 80nA |
| Turn On Delay Time | 50 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6.8mA 6.8mA |
| Logic Type | D-Type, Addressable |
| Prop. Delay@Nom-Sup | 400 ns |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 1 |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4099M013TR Overview
16-SOIC (0.154, 3.90mm Width) contains it. A package of Tape & Reel (TR) has been used. In its configuration, Standard is used as the output. The Logic type of this electrical device is D-Type, Addressable. A Surface Mount mount is used for mounting this electronic part. The supply voltage of the device is 3V~20V. During operation, the temperature is set at -55°C~125°C. In the 4000B series, this FPGA is located. It is designed with 8 bits. This device has been designed with 16 terminations available. The family it belongs to is HCF4099. In order to function, the supply voltage should be set to 5V. It is equipped with 16 pin count. It is designed with 16 pins. Surface Mount is the method used for mounting this electronic part. The part is in the FF/Latches subcategory. 20V is the maximum supply voltage (Vsup). Ensure that the supply voltage (Vsup) is greater than 3V. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. The reliability of this device makes it well suited to TAPE AND REEL. Its 6.8mA output current allows for maximum design flexibility. As far as external factors are concerned, it consumes 80nA of quiescent current without getting affected by them.
HCF4099M013TR Features
16-SOIC (0.154, 3.90mm Width) package
4000B series
8 Bits
HCF4099 family
16 pin count
16 pins
HCF4099M013TR Applications
There are a lot of STMicroelectronics HCF4099M013TR Latches applications.
- Address register
- Avionics
- Automotive ADAS
- Display
- A/D and D/A conversion
- OC-48 communication systems
- Phase comparator
- Automatic test equipment
- Pattern generators
- Serial Output Register
