banner_page

HCF4541M013TR

5V Programmable Timer Programmable Timers HCF4541 14 Pins 100kHz 5V 14-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-HCF4541M013TR
  • Package: 14-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 455
  • Description: 5V Programmable Timer Programmable Timers HCF4541 14 Pins 100kHz 5V 14-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-SOIC (0.154, 3.90mm Width)
Number of Pins 14
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
Termination SMD/SMT
Type Programmable Timer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 200mW
Technology CMOS
Voltage - Supply 3V~20V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 100kHz
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number HCF4541
Pin Count 14
Supply Voltage-Max (Vsup) 20V
Supply Voltage-Min (Vsup) 3V
Power Dissipation 200mW
Number of Bits 16
Propagation Delay 18 μs
Quiescent Current 100μA
Turn On Delay Time 18 μs
Number of Timers/Counters 1
High Level Output Current -8.4mA
Low Level Output Current 8.4mA
Count Direction UP
Load/Preset Input YES
Length 8.65mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC

HCF4541M013TR Overview


14-SOIC (0.154, 3.90mm Width) comes in a package with the timer clock. There is a programmable timer set at a frequency of 100kHz.It is used to pack in Tape & Reel (TR) case. The mounting type recommended is Surface Mount.The programmable timer can supply a voltage of 3V~20V. The type of chips can be divided into Programmable Timer. The operating temperature of this timer clock is -55°C~125°C. To mount this digital timer with Surface Mount. It is based on HCF4541. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. The timer clock runs quiescent current at 100μA. The number of Timers/Counters on the device is 1.

HCF4541M013TR Features


Operate frequency at 100kHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Quiescent Current at 100μA
1 Timers/Counters

HCF4541M013TR Applications


There are a lot of STMicroelectronics HCF4541M013TR Programmable Timers & Oscillators applications.

  • Consumer Electronics
  • Low-Power Wireless
  • Building Automation
  • Clutch Actuator circuit
  • Intruder Detection
  • Smart Key
  • Remote current sensor
  • White Goods
  • Sensor Node
  • Domestic appliances

Write a review

Note: HTML is not translated!
    Bad           Good