HCF4556M013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HCF4556 |
| Pin Count | 16 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 100mW |
| Throw Configuration | DP4T |
| Propagation Delay | 440 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 440 ns |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 6.8mA 6.8mA |
| Supply Type | Dual |
| Max I(ol) | 0.00036 A |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCF4556M013TR Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC is indicated by Decoder/Demultiplexer.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 3V~20V, designers are provided with a greater degree of flexibility.Multiplexers of the 4000B series can be used in a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number HCF4556 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.As a type of supply, Dual is employed.The board has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.It is recommended that the minimum supply voltage (Vsup) be kept at 3V so that unnecessary failures can be prevented.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.In the absence of external influences, it consumes 100μA current of multiplexer ic.The switches packaging is based on TAPE AND REEL.There are 4 output lines designed to serve as the source of the signal.In order for the digitalswitch to function normally, it has 1 circuits.
HCF4556M013TR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Dual
4 output lines
HCF4556M013TR Applications
There are a lot of STMicroelectronics HCF4556M013TR Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- PCIe
- Code converters
- A/D converters
- Textile mills
- Data collection system
- Paper plants
- Analog to digital conversion
- Logic circuits
- Memory chips
