HCPL-0810
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8541.40.80.00 |
| Subcategory | Line Driver or Receivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HCPL-0810 |
| JESD-30 Code | R-PDSO-G8 |
| Function | Current Source |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Voltage - Input | 4.75V~5.25V |
| Current - Output | 1A |
| Differential Output | NO |
| Input Characteristics | STANDARD |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
HCPL-0810 Overview
Buck boost converter is included in the package Tube.8-SOIC (0.154, 3.90mm Width) is the way in which voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.A maximum operating temperature of -40°C~85°C should not be exceeded during operation.Current regulator is possible to use a voltage input of 4.75V~5.25V for the input.In the case of 8 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.In the HCPL-0810 family, current regulator is a member.There is no reason why the constant current cannot work as long as it is powered by a 5VV power source.In addition to the maximum design flexibility that 1A provides, its output current is also quite high.Part Line Driver or Receivers consists of these current regulations as well as other current regulations.It is recommended that the supply voltage (Vsup) be greater than 4.75V.The maximal supply voltage (Vsup) supplied for its operation reaches 5.25V.A 5V power supply is used to power the boost converter.
HCPL-0810 Features
Tube package
HCPL-0810 family
5V power supplies
HCPL-0810 Applications
There are a lot of Broadcom Limited HCPL-0810 Current Regulation/Managements applications.
- Over-current protection
- Over current monitor
- Current sensing
- Engine management
- Vehicle dynamic controls
- Power management
- Power supply current measurement
- Programmable current source
- Battery chargers
- Suspension controls
