HCPL-7520-000E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | HCPL-7520 |
| Approval Agency | CSA, UL, VDE |
| Output Voltage | 6V |
| Number of Channels | 1 |
| Voltage | 5V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 11.7mA |
| Nominal Supply Current | 16mA |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 600nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 100 kHz |
| Rise Time | 3μs |
| Collector Emitter Breakdown Voltage | 6V |
| Voltage - Input Offset | 600μV |
| Input Current | 16mA |
| Isolation Voltage | 3.75kV |
| Height | 3.56mm |
| Length | 9.8mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCPL-7520-000E Overview
In the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be 8 terminations in the next few months. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. 8 pins are available on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 600μV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C TA . The buffer amplifier is capable of operating from a supply current of 11.7mA . There are 1 channels on the operational amplifiers. In this linear amplifier, there is also an analog IC called a ANALOG CIRCUIT.
HCPL-7520-000E Features
supply voltage of 5V
HCPL-7520-000E Applications
There are a lot of Broadcom Limited HCPL-7520-000E Instrumentational OP Amps applications.
- Medical imaging
- Non-polarized electrodes
- High-frequency data acquisition systems
- Digital cameras
- Communication
- Test equipment
- Semiconductor detectors
- Band-stop filter
- Communication device
- ECG equipment
