HCPL-7520-500E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HCPL-7520 |
| Output Voltage | 6V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 11.7mA |
| Nominal Supply Current | 16mA |
| Amplifier Type | Current Sense |
| Common Mode Rejection Ratio | 63 dB |
| Current - Input Bias | 600nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 600μV |
| Bandwidth | 100 kHz |
| Voltage - Input Offset | 600μV |
| Input Current | 16mA |
| Isolation Voltage | 3.75kV |
| Height Seated (Max) | 4.455mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCPL-7520-500E Overview
Packaged in a 8-SMD, Gull Wing case, the buffer op amp is ready to use. Current Sense-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp ic rates 600μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C TA . It is possible to operate this buffer amplifier from a supply current of 11.7mA . This op amp contains 1 circuits. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC.
HCPL-7520-500E Features
supply voltage of 5V
HCPL-7520-500E Applications
There are a lot of Broadcom Limited HCPL-7520-500E Instrumentational OP Amps applications.
- Addition operation circuits
- MP3
- Gaming industry
- pH (acidity)
- Polarized electrodes
- Scintillation detectors
- Test and measurement instruments
- Switching amplifier
- Power generator
- Industrial applications including automation
