HCPL-7800-000E
| Parameters | |
|---|---|
| Propagation Delay | 5 μs |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 100 kHz |
| Rise Time | 4.3μs |
| Collector Emitter Breakdown Voltage | 7V |
| -3db Bandwidth | 100MHz |
| Input Current | 10.86mA |
| Isolation Voltage | 3.75kV |
| Height Seated (Max) | 4.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | HYBRID |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | HCPL-7800 |
| Approval Agency | UL |
| Output Voltage | 3.8V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Voltage | 5V |
| Number of Circuits | 1 |
| Operating Supply Current | 10.9mA |
| Nominal Supply Current | 16mA |
HCPL-7800-000E Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. Please take in mind that this instrumentation amplifier should be run at 5V. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 300μV voltage. This electronic part is recommended for mounting type Through Hole. With regard to operating temperature, op amp ranges -40°C~85°C. An 10.9mA volt supply current is needed for this linear amplifier to operate. A linear amplifier like this has 1 circuits on it. There are a total of 1 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
HCPL-7800-000E Features
supply voltage of 5V
HCPL-7800-000E Applications
There are a lot of Broadcom Limited HCPL-7800-000E Instrumentational OP Amps applications.
- Digital cameras
- Automotive sensors
- Television
- Laptop
- Displayers for aircraft and air transportation control systems
- earphone
- Fission chambers
- Wireless base stations
- Active probe
- High input resistance broadband
