HCPL-7800A-000E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | HYBRID |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HCPL-7800 |
| Approval Agency | CSA, UL, VDE |
| Output Voltage | 3.8V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 10.9mA |
| Nominal Supply Current | 10.86mA |
| Max Output Voltage | 6V |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 11.56mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 100 kHz |
| Rise Time | 2.96μs |
| Collector Emitter Breakdown Voltage | 5.5V |
| Current - Output / Channel | 16mA |
| -3db Bandwidth | 100MHz |
| Input Current | 11.56mA |
| Isolation Voltage | 3.75kV |
| Voltage Gain-Min | 7.92 |
| Ambient Temperature Range High | 85°C |
| Height | 4.7mm |
| Length | 9.8mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCPL-7800A-000E Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. An op amp of this type is a Isolation-type. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. Please take in mind that this instrumentation amplifier should be run at 5V. There are 8 pins on this chip. There is an input offset voltage of 300μV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 10.9mA . As far as the device is concerned, buffer amplifier has 1 channels. The operating supply voltage of the buffer op amp is rated at 5V. In this op amp ic, the minimum voltage gain is 7.92.
HCPL-7800A-000E Features
supply voltage of 5V
HCPL-7800A-000E Applications
There are a lot of Broadcom Limited HCPL-7800A-000E Instrumentational OP Amps applications.
- Medical instruments
- Video amplifiers
- Video conversion and routing
- Comparator
- Commercial audio systems
- Signal transformation
- Gaming industry
- Cinema or auditorium audio system
- Broadcasting
- Television broadcasting equipment
