HCPL-7800A-500E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HCPL-7800 |
| Output Voltage | 3.8V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 10.9mA |
| Nominal Supply Current | 10.86mA |
| Slew Rate | 10000 V/μs |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 76 dB |
| Current - Input Bias | 500nA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 100 kHz |
| -3db Bandwidth | 100MHz |
| Input Current | 5μA |
| Isolation Voltage | 3.75kV |
| Voltage Gain-Min | 7.92 |
| Height Seated (Max) | 4.455mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
HCPL-7800A-500E Overview
There is a 8-SMD, Gull Wing case package that contains the instrumentation amplifiers. Isolation-type instrumentation amplifiers are used in this application. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Linear amplifier includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. You can run this op amp ic on 10.9mA . Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 5V voltage. There is a minimum voltage gain of 7.92 that this buffer op amp is capable of conducting.
HCPL-7800A-500E Features
supply voltage of 5V
HCPL-7800A-500E Applications
There are a lot of Broadcom Limited HCPL-7800A-500E Instrumentational OP Amps applications.
- Vehicle electronics
- High input resistance broadband
- Weak signal detection
- Commercial audio systems
- Industrial applications including automation
- Communication
- Blood pressure sensors
- Cinema or auditorium audio system
- High-frequency data acquisition systems
- Video conversion and routing
