HCPL-7840-300E
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HCPL-7840 |
| Output Voltage | 3.8V |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 10.86mA |
| Nominal Supply Current | 10.86mA |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 76.1 dB |
| Current - Input Bias | 500nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 15.5mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 100 kHz |
| Rise Time | 2.96μs |
| Voltage Gain | 18.49dB |
| Power Supply Rejection Ratio (PSRR) | 170dB |
| Voltage - Input Offset | 300μV |
| -3db Bandwidth | 100MHz |
| Input Current | 15.5mA |
| Isolation Voltage | 3.75kV |
| Ambient Temperature Range High | 85°C |
| Height | 4.455mm |
| Length | 9.8mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
HCPL-7840-300E Overview
It is packaged in an 8-SMD, Gull Wing-case that protects the operational amplifiers from damage. This is a Isolation type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. The buffer op amp includes 8 pins. Op amp ic rates 300μV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureYou can run this op amp ic on 10.86mA . 18.49dB should remain the voltage gain. A benefit of this op amp ic is that it outputs Differential signals, which is one of the many advantages it has to offer. There are 1 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V.
HCPL-7840-300E Features
supply voltage of 5V
18.49dB voltage gain
Output Type: Differential
HCPL-7840-300E Applications
There are a lot of Broadcom Limited HCPL-7840-300E Instrumentational OP Amps applications.
- Multimedia playback equipment
- Home audio systems
- Proportional counter tubes
- Vehicle electronics
- Automation control systems
- Scintillation detectors
- Medical instruments
- Automotive sensors
- Information processing
- Television broadcasting equipment
