HCT4066QPWRG4Q1

24ns, 35ns SPST - NO 95Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74HCT4066 14 Pins 4.5V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-HCT4066QPWRG4Q1
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 432
Description: 24ns, 35ns SPST - NO 95Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74HCT4066 14 Pins 4.5V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	80Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HCT4066
Output	SEPARATE OUTPUT
Pin Count	14
Qualification Status	Not Qualified
Power Supplies	5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	2μA
Max Supply Current	2μA
Propagation Delay	18 ns
Turn On Delay Time	24 ns
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	35 ns
On-State Resistance (Max)	95Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	24ns, 35ns
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-72dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	36ns
Switch-off Time-Max	53ns
Voltage - Supply, Single (V+)	4.5V~5.5V
Normal Position	NO
Signal Current-Max	0.25A
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

HCT4066QPWRG4Q1 Overview

This electronic part is conveniently packaged in 14-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~125°C TA are extended for operation. 14 terminations have been made so far. A 4 channel electronic part produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 14 series. These analog multiplexers are built based on SPST - NO switching circuits. Using the 74HCT4066 search parameter, you can discover variants of the switch. A 80Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 14 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 4.5V. This digital switch can be operated with a current of 2μA. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 2μA, damage can occur. There are SEPARATE OUTPUT outputs on this analog switch ic. It is possible to transfer data over a 200MHz-bandwidth. It comes from the Automotive, AEC-Q100 series.