HCTL-1100#PLC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | DC Motor Controller |
| Additional Feature | CAN BE USED FOR DC, DC BRUSHLESS, AND STEP MOTOR CONTROL |
| HTS Code | 8542.31.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | HCTL-1100 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -20°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | OTHER |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | TTL |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Supply Current-Max (Isup) | 30mA |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | RoHS Compliant |
HCTL-1100#PLC Overview
44-LCC (J-Lead)is an appropriate package for this device.It comes in a case with a [0].There is no installation of this component in the way of Surface Mount.This is appropriate for the component that is applied in DC Motor ControllerAn output voltage of 4.75V~5.25V volts can be provided by the device.Using the HCTL-1100can help you find related parts.There are 44 terminations on it.Be sure to set the device to 5V.Electronic components in this system belong to the Motion Control Electronics family.The potentiometer conducts in a supply voltage of 85°C.Voltage at 5Vcan be delivered by the device.The component has been design to operate at a minimum temperature of -20°C.CAN BE USED FOR DC, DC BRUSHLESS, AND STEP MOTOR CONTROL can also be founded when using this device.STEPPER MOTOR CONTROLLER is the analog IC that this device employs.
HCTL-1100#PLC Features
It is based on HCTL-1100.
Set the part at 5V volts
Other Analog IC Type : STEPPER MOTOR CONTROLLER
HCTL-1100#PLC Applications
There are a lot of Broadcom Limited HCTL-1100#PLC Specialized Interface ICs applications.
- Communication systems
- Signal routing between systems
- Compatible with 65 V DACs and ADCs such as
- AD7840/8, AD7870/1/2/4/5/6/8
- USB 1.1 signal switching circuits
- Battery Powered Instruments
- Avionics
- Switching Systems
- Precision data acquisition
- Industrial and process control systems
