HEC4013BT,112
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 40MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| Max Frequency@Nom-Sup | 7000000Hz |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
HEC4013BT,112 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tubepackage. Differentialis the output configured for it. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 3V~15V volts. In the operating environment, the temperature is -40°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 4000Bseries contain this type of chip. It should not exceed 40MHzin terms of its output frequency. In total, there are 2 elements. There is a consumption of 4μAof quiescent energy. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 4013 family. The power source is powered by 5V. This JK flip flop has a 7.5pFfarad input capacitance. This RS flip flops is a part number FF/Latches.
HEC4013BT,112 Features
Tube package
4000B series
HEC4013BT,112 Applications
There are a lot of NXP USA Inc. HEC4013BT,112 Flip Flops applications.
- Data transfer
- Dynamic threshold performance
- Single Down Count-Control Line
- Registers
- 2 – Bit synchronous counter
- Safety Clamp
- Power down protection
- CMOS Process
- Frequency Divider circuits
- Computing
