HEC4013BT,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 4000B |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 40MHz |
| Propagation Delay | 220 ns |
| Turn On Delay Time | 220 ns |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
HEC4013BT,118 Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. A 3V~15Vsupply voltage is required for it to operate. -40°C~125°C TAis the operating temperature. The type of this D latch is D-Type. FPGAs belonging to the 4000Bseries contain this type of chip. Its output frequency should not exceed 40MHz Hz. T flip flop consumes 4μA quiescent energy. Terminations are 14. The 4013family includes it. The power source is powered by 5V. A JK flip flop with a 7.5pFfarad input capacitance is used here. A part of the electronic system is mounted in the way of Surface Mount. There are 14pins on it. Its clock edge trigger type is Positive Edge. The superior flexibility is achieved through the use of 2 circuits. There are no output lines on the JK flip flop.
HEC4013BT,118 Features
Tape & Reel (TR) package
4000B series
14 pins
HEC4013BT,118 Applications
There are a lot of Nexperia USA Inc. HEC4013BT,118 Flip Flops applications.
- Computing
- Parallel data storage
- Load Control
- Shift Registers
- ESD performance
- High Performance Logic for test systems
- Consumer
- 2 – Bit synchronous counter
- Storage registers
- Event Detectors
