HEF4013BP,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 3V~15V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 4013 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Clock Frequency | 40MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 3.4mA 3.4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 60ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7.5pF |
| fmax-Min | 7 MHz |
| Max Frequency@Nom-Sup | 7000000Hz |
| RoHS Status | ROHS3 Compliant |
HEF4013BP,652 Overview
14-DIP (0.300, 7.62mm)is the packaging method. A package named Tubeincludes it. T flip flop is configured with an output of Differential. This trigger uses the value Positive Edge. Through Holeis occupied by this electronic component. With a supply voltage of 3V~15V volts, it operates. -40°C~125°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 4000Bseries of FPGAs. It should not exceed 40MHzin its output frequency. The list contains 2 elements. There is a consumption of 4μAof quiescent energy. A total of 14terminations have been recorded. The 4013 family contains it. The power supply voltage is 5V. Its input capacitance is 7.5pFfarads. The part you are looking for is included in FF/Latches. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 3V. This D flip flop is well suited for BULK PACK based on its reliable performance.
HEF4013BP,652 Features
Tube package
4000B series
HEF4013BP,652 Applications
There are a lot of NXP USA Inc. HEF4013BP,652 Flip Flops applications.
- Consumer
- Memory
- Storage registers
- Frequency division
- ESCC
- Set-reset capability
- ESD performance
- Circuit Design
- Functionally equivalent to the MC10/100EL29
- Guaranteed simultaneous switching noise level
